Laser Engraving Growlers

With a huge uptick in local brew pubs and taprooms, laser engraving growlers is quickly becoming a popular laser application. Not only can you brand your business, but throw a customer's name on a growler and you've got a fan for life!

Using a laser bonding agent like CerMark or TherMark makes laser engraving these metal growlers easy! How does it work? The heat from the laser bonds the marking agent to the metal, resulting in a permanent mark.

Here we've used a bonding agent to mark these stainless steel growlers. Read on to learn how we did it!

Scarica ora

Laser engraved growlers.

A screen shot of growler art in Corel Draw

Scegli uno dei nostri disegni o crea il tuo!

Place the growler in the laser system, after coating them with CerMark.

Processo di incisione in atto.

Dettaglio dell'incisione.

Materiali necessari

Growlers - we purchased ours through Amazon
CerMark
Macchina Epilog Laser

Abbiamo usato un laser Helix da 60 watt con queste impostazioni:

Raster: velocità al 15 % // potenza al 100 % // 600 DPI // Incisione modalità Stucki

design files for laser engraving growlers

Download the engraving files and adjust the artwork accordingly. Depending on the size of your growler, you may need to change the dimensions of the design to fit properly.

Coat your growler with CerMark and let dry. If you have a fiber laser, you can skip the pre-treating step, as these systems were designed for bare-metal marking. Just be sure to check your fiber laser user manual for recommended settings for your particular metal.

Now it's time to set up the rotary. To insert the rotary, lower your engraving table, remove the vector or engraving table, and power off your machine. Plug in your rotary attachment and then restart the laser. The laser head will relocate to a new home position for the rotary.

laser bonding material to metal for permanent mark

Once you've customized your graphics, send the job to the laser and press GO! The laser bonds the marking agent to the metal and you're left with a permanent design. Once engraved, remove the remaining bonding agent with a wet cloth and that's all there is to it!